How to make a memory mate in Photoshop
A memory mate puts the team photo and one player together on a single print, usually a 10 x 8. Here is how to build one from a blank canvas: set up the file, frame the team photo, cut out the player, add the names and a team color, and export it for the lab.
Short on time? Get our free memory mate template with the layers already built.

What you need
- Adobe Photoshop CC or newer (Select Subject needs 2020 or later)
- The team photo, shot wide enough to crop
- One individual photo per player, full length on a plain background if you can
- The roster: names, numbers and positions, spelled the way the families want them
- The team colors and logo
1Set up the canvas
A memory mate is usually a 10 x 8 landscape print (sold as an 8 x 10) or a 7 x 5. At 300 ppi, 10 x 8 is 3000 x 2400 pixels. Make the document in sRGB, which is what most labs expect.
Add guides 1/8 inch (38 px) in from each edge for the trim and 1/4 inch (75 px) in for the safe area. The lab trims a little, so keep names, numbers and faces inside the safe line. If your lab wants bleed added outside the trim, ask them for the exact size first.
2Place and frame the team photo
File > Place Embedded, pick the team photo, and it comes in as a Smart Object, so you can resize it without losing quality. A common layout puts the team on the left half and the player on the right.
Crop it to a clean 3:2 frame with a little room around the group. Add a thin frame in the team color behind it, and a soft drop shadow (Multiply, about 60% opacity) so it sits on the background instead of floating.
3Cut out the player
Open the player photo and choose Select > Subject. Then Select > Select and Mask, and use these settings: Smart Radius on, Shift Edge about -10%, Decontaminate Colors at about 80%, and Output To: New Layer with Layer Mask. That keeps hair clean without the colored fringe you get from a busy gym background.
One more tip: Select Subject often leaves a faint haze in the mask around the player, which shows as thin lines on a dark design. Click the mask, open Levels and move the black input slider up to about 14. The haze disappears and the edges stay soft.
Drag the cut-out layer into the memory mate, convert it to a Smart Object, and size it so the player stands nearly the full height of the print with the feet just above the bottom safe line.
4Ground the player with a shadow
A cut-out with nothing under it looks pasted on. On a new layer below the player, draw a wide, flat ellipse at the feet with a soft black brush, set it to Multiply at 40 to 60%, and blur it until it reads as floor shadow. On a dark gym background, a faint mirrored copy of the player under the feet (flipped, about 16% opacity, faded out with a gradient mask) reads as a polished floor.
5Add the names and numbers
Keep the type live (never rasterize it), so the same file works for the next player. A simple hierarchy reads best from across a room: the first name small, the last name large, and the jersey number or class year as the biggest element. Add the position, school, team name and season in smaller lines.
Long last names are the usual trouble. Decide the widest a name may run, note it in the layer name, and scale longer names down from the center so the layout never changes.
6Make the team color one click
Put every accent that should follow the team color (the photo frame, rules, team-color words) in one group. Above it, add a Solid Color fill layer and clip it to the group (Alt or Option click between the two layers). Now one double-click on that fill recolors everything at once, and the same file serves every team on your schedule.
7Export for the lab
File > Export > Export As, JPG, high quality, with Convert to sRGB checked. Check the size in the dialog: it should read 3000 x 2400 for a 10 x 8 at 300 ppi. Name the files by team and player so the lab and the families can match them.
8Repeat for the whole roster
Save the finished file as your template. For each player, replace the cut-out (double-click the Smart Object, paste the new player, save), retype the name and number, and export. The team photo, the colors and the logo stay put, so most players take a couple of minutes once the first one is right.
Questions
What size is a memory mate?
Most are 10 x 8 landscape (sold as 8 x 10) or 7 x 5. Build at 300 ppi at the print size: 3000 x 2400 pixels for 10 x 8 and 2100 x 1500 for 7 x 5.
What resolution should a memory mate be?
300 ppi at the final print size. A player photo enlarged much past 125% to fill the frame can print soft, so shoot the individuals close enough to fill the frame.
Can I make a memory mate in Lightroom?
Not well. Lightroom has no layers, so you cannot place a cut-out player over a team photo with live type. Use Photoshop, or a Photoshop template that has the layers built.
How long does a memory mate take?
The first one, built from scratch, takes an hour or more. From a template, with the cut-out automated, each player takes a few minutes.
Do I need a green screen?
No. Select Subject handles a normal gym or field background well. A plain, evenly lit background with some space behind the player still gives the cleanest edges, especially on hair.
